基于纸浆纤维的贵重物品内包装塑造系统研究

为解决贵重物品与其内包装“契合度”不高的问题，提出基于纸浆纤维的贵重物品内包装塑造系统。系统通过三维扫描获取待包装物品的点云信息，经主控计算机进行数据处理，以下位机为执行中枢，辅之其他外部设备，利用纸浆纤维为贵重物品塑造“量身定制”的内包装，提升内包装契合度，增强保护效果，绿色环保，安全稳定。     

Moulded pulp products manufacturing with thermoforming

For an effective optimization of pulp thermoforming and of the moulded pulp products manufactured by this process, a full understanding of the process physics combined with full knowledge of the pressing equipment is necessary. For this reason, in this Addendum, we clarify how the process parameters “Holding time,” “Vacuum time,” “Cycle time,” and “Temperature” were interpreted and subsequently defined for the analysis of the process and product‐related outputs of the thermoforming experiments.     

木片筛余物高得率半化学法清洁制浆技术研究

以太阳纸业备料车间木片筛选碎料（筛余物）为原料，对其烧碱法半化学制浆的实验室工艺和生产试验进行了研究。结果表明，筛余物采用半化学法制浆可获得较高得率和环压强度的纸浆，且用碱量对纸浆性能有显著影响。相对8%NaOH （相对于绝干原料）化学预处理，采用14%NaOH化学预处理结合两段浆浓22%的高浓磨浆工艺，所制半化学浆抄造浆张的裂断长和环压指数分别达2.89 km和9.76 N·m/g，是前者的1.9倍和1.2倍，而且优于现用国内OCC废纸浆抄造浆张；生产试验得到的浆张性能指标与实验室相吻合，其中紧度和环压强度分别达到GB/T 13023—2008瓦楞芯（原）纸AA级和A级优等品要求。     

两台竹浆碱回收锅炉NOx、SO2排放的探讨

根据两台竹浆碱回收锅炉的实际运行情况,对其结构与运行对污染物排放的影响进行了比较、分析。     

Bond strength and adaptation of pulp capping materials to dentin

This study evaluated the shear bond strength (SBS) and internal marginal adaptation of pulp‐capping materials to dentin. Flat occlusal deep dentin surfaces were produced and randomly assigned to two groups (sound or artificial caries‐affected dentin). The specimens in each group were assigned to one of seven subgroups according to the materials used: Biodentine, Theracal LC, Ultra‐Blend plus, Calcimol LC, ApaCal ART, EQUIA Forte, and Ionoseal. Buildups (3‐mm inner diameter and 2‐mm deep) were made over the dentin surfaces. The bonded specimens were tested under shear forces at a crosshead speed of 0.8 mm/min and fracture modes were determined using a stereomicroscope at 25× magnification. The materials were applied to the pulp floor of prepared Class I cavities and then the cavities were restored with composite resin. Restored molar teeth were subjected to 5,000 thermocycles and sectioned in a bucco–lingual direction. Resin replicas were made to determine the adaptation at the pulp floor with scanning electron microscopy. Significant differences were determined among both bond strengths and gap formations of the materials. EQUIA Forte applied to both dentin substrates had a significantly higher SBS than the other materials. The bond strength of each material was not influenced by the dentin condition. Biodentine (3.03%), EQUIA Forte (7.83%), and Theracal LC (13.37%) had lower gap formations compared to other materials but were not significantly different from each other.     

Simulation analysis of producing xylitol from hemicelluloses of pre-hydrolysis liquor

The pre-hydrolysis liquor (PHL) of the kraft-based dissolving pulp production process is currently sent to the recovery boiler and incinerated. However, PHL contains about 5–8% lignocelluloses that can be utilized in the production of value-added chemicals. In this study, a process for producing xylitol from hemicelluloses in PHL is developed. This process involves several acidification, neutralization, adsorption (along with reactivation) and evaporation stages. The mass balance indicates that 533 kg/h xylitol (with 99% purity), 187 kg/h lignin, 806 kg/h basic ferric acetate, and 1600 kg/h gypsum can be produced from 41,670 kg/h PHL. The energy balance shows that the evaporators are the largest consumers of energy, while the reactivation kiln, acidification, neutralization, and precipitation processes generate some heat. Overall, 41% conversion of xylose to xylitol is achieved.     

Preliminary Studies on Furfural Production from Lignocellulosics

This study focused on the production of furfural from agricultural and industrial biomass residues by a hydrodistillation process. Corncobs, sugarcane bagasse, and eucalypt wood were treated with sulfuric, hydrochloric, and phosphoric acids as catalysts, with different acid concentrations (1.5 to 5.2 mol.L ^?1). In addition, the eucalypt liquor from the auto-hydrolysis, kraft-dissolving pulp production process was also investigated as a source of furfural, using sulfuric and hydrochloric acids as a catalyst (0.9 and 3.9 mol.L ^?1) . Furfural yields of 30.2, 25.8, and 13.9% were achieved for corncob, sugarcane bagasse, and eucalypt wood, respectively, on the basis of biomass dry weight. The efficiency of conversion from pentose to furfural using eucalypt liquor from the auto-hydrolysis kraft process was 71.5% using HCl 3.9 mol.L ^?1 . Due to the presence of a high amount of pentose, corncob produced the highest amount of furfural, followed by sugarcane bagasse and then eucalypt wood.     

浅析前处理电泳线液体滤袋使用选择

介绍了奇瑞某涂装线过滤设备配置,阐述了电泳颗粒缺陷的种类,介绍了涂装行业前处理电泳线液体过滤袋的材料材质、过滤精度、溶污能力及针对颗粒缺陷的改进方法。     

一步法二甲醚合成技术

二甲醚是一种非常重要的化工原料,可用于多种精细化学品的合成,它是一种理想的清洁替代能源。一步法二甲醚合成技术克服了甲醇合成反应受到热力学平衡的限制,大大提高了CO的单程转化率。对以合成气为原料采用一步法二甲醚合成技术的反应原理,催化剂的组成与制备方法,温度、压力、空速等因素对反应造成的影响进行描述。对一步法二甲醚合成技术研发的生产装置发展进程情况进行综述和展望。     

ZnCl2水溶液制备纤维素膜的研究

以针叶浆为原料,ZnCl2水溶液为溶解溶剂,制备再生纤维素膜。利用单因数实验分析了纤维素膜制各过程中浆浓、反应温度、溶解时间对纤维素膜强度的影响,确定了最佳工艺条件为浆浓3％、反应温度90℃、溶解时间为2h。并通过X-射线衍射（XRD）、傅里叶变换红外光谱（FT-IR）、扫描电镜（SEM）分析,比较经ZnCl2水溶液处理前后纤维的结构和性能变化,发现ZnCl2水溶液是纤维素的非衍生化溶剂,经ZnCl2水溶液处理后的纤维素已由纤维素I转换为纤维素II,制备的再生纤维素膜具有一定的强度,且具有多孔性的特征。